FRIEDRICH Vibrator Motor with Stainless Steel End Cover FHE-Type

FHE engines are equipped with stainless steel covers instead of covers made of powder-coated sheet metal deep drawing. The special shape and an O-ring seal made of silicone, ensure protection against the penetration of dust and water. The stainless steel hoods are available as an option for the entire program to motor size 7. The motor housing is also coated in RAL 6011. Other colors are available on request. A special color of the motor housing with two-component Epoxy paint STEEL IT is available upon request. This Epoxy paint with particles of stainless steel INOX forms a very resilient coating. The non-toxic surface has a high resistance to chemicals, cleaning procedures, alkalis, food acids and UV rays. This coating is USDA approved. Motors with stainless steel particle-color are equipped with stainless steel hoods and are particularly for use in the food, pharmaceutical and chemical industries.

General specifications

FHE Type 50 Hz

2 pole vibrator motors (2860 min^-1)

friedrich fhe type 50 hz

TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	Maße Dimensions Cotesmm											Weight [kg]	Cable [mm]	Screw 8.8
TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	a	b	c	d	e	f	g	h	k	n	p	Weight [kg]	Cable [mm]	Screw 8.8
FHE 8-2-1.3	8	3580	0,37	1	0,79	4	A	2	140	170	40	161	182	204	180	94	342	40	212	15	4×1,5	4xM12
FHE 12-2-1.3	12	5960	0,37	1	0,79	4	A	2	140	170	40	161	182	204	180	94	342	40	212	16	4×1,5	4xM12
FHE 16-2-1.3	16	7160	0,37	1	0,79	4	A	2	140	170	40	161	182	204	180	94	342	40	212	17	4×1,5	4xM12
FHE 16-2-1.2	16	7180	0,55	1,21	0,8	5,7	A	2	140	170	40	161	192	210	180	94	374	45	234	28	4×1,5	4xM16
FHE 23-2-2.2	23	10320	0,75	1,75	0,82	7,7	A	2	140	170	40	207	192	210	225	118	430	50	268	42	4×1,5	4xM16
FHE 32-2-2.1	32	14400	1,2	2,28	0,85	7,8	B	2	140	170	20	207	230	220	225	115	444	60	274	67	4×1,5	4xM16
FHE 42-2-2.1	42	18900	1,2	2,28	0,85	7,8	B	2	140	170	20	207	230	220	225	115	444	60	274	69	4×1,5	4xM16

4 pole vibrator motors (1460 min^-1)

friedrich-typu-dp-warszawa

TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	Maße Dimensions Cotesmm											Weight [kg]	Cable [mm]	Screw 8.8
TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	a	b	c	d	e	f	g	h	k	n	p	Weight [kg]	Cable [mm]	Screw 8.8
FHE 12-4-1.1	12	1400	0,19	0,45	0,64	2,8	A	0	***	***	25	114	157	162	114	86	270	36	144	9	4×1,5	***
FHE 18-4-1.1	18	2104	0,19	0,45	0,64	2,8	A	0	***	***	25	114	157	162	114	86	320	36	144	11	4×1,5	***
FHE 40-4-1.3	40	4670	0,25	0,76	0,78	5	A	2	140	170	40	161	182	204	180	94	342	40	212	22	4×1,5	4xM12
FHE 40-4-1.2	40	4670	0,3	0,86	0,75	4,4	A	2	140	170	40	161	192	210	180	94	374	45	234	32	4×1,5	4xM16
FHE 50-4-1.5	50	5850	0,25	0,76	0,78	5	A	1	105	140	28	161	155	176	180	106	365	36	205	22	4×1,5	4xM12
FHE 55-4-1.2	55	6450	0,3	0,86	0,75	4,4	A	2	140	170	40	161	192	210	180	94	424	45	234	35	4×1,5	4xM16
FHE 65-4-1.4	65	7605	0,4	0,86	0,76	5	A	2	140	170	40	161	182	198	180	94	392	40	222	25	4×1,5	4xM12
FHE 75-4-2.2	75	8800	0,6	1,43	0,8	5,7	A	2	140	170	40	207	192	210	225	118	430	50	268	46	4×1,5	4xM16
FHE 95-4-2.2	95	11100	0,6	1,43	0,8	5,7	A	2	140	170	40	207	192	210	225	118	430	50	268	50	4×1,5	4xM16
FHE 125-4-2.4	125	14620	0,6	1,43	0,8	5,7	A	2	140	170	40	207	192	210	225	118	496	50	268	58	4×1,5	4xM16
FHE 150-4-2.4	150	17500	0,6	1,43	0,8	5,7	A	2	140	170	40	207	192	210	225	118	496	50	268	60	4×1,5	4xM16
FHE 150-4-2.1	150	17500	1,1	2,33	0,82	6,6	B	2	140	170	20	207	230	220	225	115	514	60	274	72	4×1,5	4xM16
FHE 190-4-2.3	190	22300	1,1	2,33	0,82	6,6	B	2	140	170	20	250	230	220	272	140	520	60	300	82	4×1,5	4xM16
FHE 200-4-2.1	200	23400	1,1	2,33	0,82	6,6	B	2	140	170	20	207	230	220	225	115	570	60	274	75	4×1,5	4xM16
FHE 235-4-3.4	235	27500	1,4	3,04	0,87	9,1	C	3	83	230	25	280	260	280	300	160	500	75	330	110	4×1,5	6xM20
FHE 285-4-3.4	285	33350	1,4	3,04	0,87	9,1	C	3	83	230	25	280	260	280	300	160	500	75	330	116	4×1,5	6xM20
FHE 300-4-4.0	300	35000	2	3,8	0,87	6,8	C	4	105	248	28	280	300	310	300	160	540	80	344	128	4×1,5	6xM20
FHE 340-4-4.1	340	39700	3	5,89	0,87	7,8	C	4	105	248	28	280	300	310	300	160	540	80	344	138	4×1,5	6xM20
FHE 415-4-4.1	415	48600	3	5,89	0,87	7,8	C	4	105	248	28	280	300	310	300	160	610	80	344	146	4×1,5	6xM20
FHE 430-4-6.0	430	50200	3,5	7,03	0,84	5,6	C	6	118	280	35	320	370	340	340	185	680	90	390	197	4×1,5	6xM24
FHE 550-4-7.0	550	64200	7	15,2	0,86	7,6	C	6	118	280	35	320	370	340	340	185	680	90	390	250	4×2,5	6xM24
FHE 700-4-7.1	700	81800	7	15,2	0,86	7,6	C	6	118	280	35	320	370	340	340	185	680	90	390	275	4×2,5	6xM24
FHE 800-4-7.1	800	93600	7	15,2	0,86	7,6	C	6	118	280	35	320	370	340	340	185	770	90	390	282	4×2,5	6xM24
FHE 900-4-8.0	900	105200	8	17,1	0,87	7,6	D	8	110	350	35	360	470	420	400	210	970	90	430	377	4×2,5	8xM24

6 pole vibrator motors (980 min^-1)

friedrich-typu-fw-warszawa

TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	Maße Dimensions Cotesmm											Weight [kg]	Cable [mm]	Screw 8.8
TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	a	b	c	d	e	f	g	h	k	n	p	Weight [kg]	Cable [mm]	Screw 8.8
FHE 40-6-1.3	40	2120	0,15	0,72	0,78	8	A	2	140	170	40	161	182	204	180	94	392	40	212	22	4×1,5	4xM12
FHE 65-6-1.3	65	3440	0,15	0,72	0,78	8	A	2	140	170	40	161	182	204	180	94	392	40	212	27	4×1,5	4xM12
FHE 55-6-1.2	55	2900	0,2	0,86	0,62	3,6	A	2	140	170	40	161	192	210	180	94	424	45	234	35	4×1,5	4xM16
FHE 95-6-1.2	95	5000	0,2	0,86	0,62	3,6	A	2	140	170	40	161	192	210	180	94	514	45	234	39	4×1,5	4xM16
FHE 95-6-2.2	95	5000	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	430	50	268	50	4×1,5	4xM16
FHE 120-6-2.2	120	6400	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	430	50	268	51	4×1,5	4xM16
FHE 150-6-2.2	150	7900	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	496	50	268	53	4×1,5	4xM16
FHE 175-6-2.4	175	9300	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	496	50	268	63	4×1,5	4xM16
FHE 200-6-2.4	200	10600	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	556	50	268	66	4×1,5	4xM16
FHE 225-6-2.4	225	11950	0,5	1,52	0,7	4,2	A	2	140	170	40	207	192	210	225	118	556	50	268	69	4×1,5	4xM16
FHE 200-6-2.1	200	10600	1	1,71	0,7	5,3	B	2	140	170	20	207	230	220	225	115	570	60	274	77	4×1,5	4xM16
FHE 250-6-2.3	250	13200	1	1,71	0,7	5,3	B	2	140	170	20	250	230	220	272	140	520	60	300	88	4×1,5	4xM16
FHE 300-6-2.3	300	15800	1	1,71	0,7	5,3	B	2	140	170	20	250	230	220	272	140	520	60	300	92	4×1,5	4xM16
FHE 340-6-2.3	340	18000	1	1,71	0,7	5,3	B	2	140	170	20	250	230	220	272	140	590	60	300	98	4×1,5	4xM16
FHE 400-6-3.1	400	21000	1,7	3,23	0,77	5,3	C	3	83	230	25	250	260	280	272	150	620	75	320	123	4×1,5	6xM20
FHE 500-6-3.4	500	26300	1,7	3,23	0,77	5,3	C	3	83	230	25	280	260	280	300	160	570	75	330	136	4×1,5	6xM20
FHE 600-6-3.4	600	31800	1,7	3,23	0,77	5,3	C	3	83	230	25	280	260	280	300	160	640	75	330	147	4×1,5	6xM20
FHE 680-6-3.4	680	35800	1,7	3,23	0,77	5,3	C	3	83	230	25	280	260	280	300	160	640	75	330	155	4×1,5	6xM20
FHE 500-6-4.0	500	26300	2,2	5,23	0,74	5,8	C	4	105	248	28	280	300	310	300	160	610	80	344	153	4×1,5	6xM20
FHE 550-6-4.1	550	29000	2,7	6,18	0,8	6,6	C	4	105	248	28	280	300	310	300	160	680	80	344	159	4×1,5	6xM20
FHE 680-6-4.1	680	35800	2,7	6,18	0,8	6,6	C	4	105	248	28	280	300	310	300	160	680	80	344	168	4×1,5	6xM20
FHE 780-6-4.1	780	41340	2,7	6,18	0,8	6,6	C	4	105	248	28	280	300	310	300	160	800	80	344	186	4×1,5	6xM20
FHE 700-6-4.7	700	36900	2,7	6,71	0,6	6,6	C	4	105	248	28	320	300	310	342	180	700	80	365	187	4×1,5	6xM20
FHE 850-6-4.7	850	44800	2,7	6,71	0,6	6,6	C	4	105	248	28	320	300	310	342	180	700	80	365	196	4×1,5	6xM20
FHE 1000-6-4.7	1000	52600	2,7	6,71	0,6	6,6	C	4	105	248	28	320	300	310	342	180	700	80	365	204	4×1,5	6xM20
FHE 1000-6-7.0	1000	52600	4	8,27	0,84	7,5	C	6	118	280	35	320	370	340	340	185	770	90	390	271	4×1,5	6xM24
FHE 1150-6-7.0	1150	61000	4	8,27	0,84	7,5	C	6	118	280	35	320	370	340	340	185	910	90	390	281	4×1,5	6xM24
FHE 1300-6-7.0	1300	68400	4	8,27	0,84	7,5	C	6	118	280	35	320	370	340	340	185	910	90	390	285	4×1,5	6xM24
FHE 1400-6-7.0	1400	73700	4	8,27	0,84	7,5	C	6	118	280	35	320	370	340	340	185	910	90	390	296	4×1,5	6xM24
FHE 1600-6-7.0	1600	84300	4	8,27	0,84	7,5	C	6	118	280	35	320	370	340	340	185	950	90	390	310	4×1,5	6xM24
FHE 1750-6-7.8	1750	92100	5,6	12,3	0,66	7,3	C	6	118	280	35	360	370	340	400	210	870	85	425	388	4×2,5	6xM24
FHE 2000-6-7.8	2000	105300	5,6	12,3	0,66	7,3	C	6	118	280	35	360	370	340	400	210	930	85	425	397	4×2,5	6xM24
FHE 1750-6-8.0	1750	92100	7,5	14,25	0,68	7,6	D	8	110	350	35	360	470	420	400	210	970	90	430	450	4×2,5	8xM24
FHE 2000-6-8.0	2000	105300	7,5	14,25	0,68	7,6	D	8	110	350	35	360	470	420	400	210	1030	90	430	470	4×2,5	8xM24

8 pole vibrator motors (740 min^-1)

friedrich-typu-ff-warszawa

TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	Maße Dimensions Cotesmm											Weight [kg]	Cable [mm]	Screw 8.8
TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	a	b	c	d	e	f	g	h	k	n	p	Weight [kg]	Cable [mm]	Screw 8.8
FHE 95-8-2.2	95	2850	0,3	2	0,6	6,5	A	2	140	170	40	207	192	210	225	118	430	50	268	50	4×1,5	4xM16
FHE 150-8-2.2	150	4500	0,3	2	0,6	6,5	A	2	140	170	40	207	192	210	225	118	496	50	268	53	4×1,5	4xM16
FHE 200-8-2.1	200	6000	0,85	3,18	0,7	7	B	2	140	170	20	207	230	220	225	115	570	60	274	77	4×1,5	4xM16
FHE 340-8-2.3	340	10210	0,85	3,18	0,7	7	B	2	140	170	20	250	230	220	272	140	590	60	300	98	4×1,5	4xM16
FHE 500-8-3.4	500	15000	1,2	3,59	0,75	4,8	C	3	83	230	25	280	260	280	300	160	570	75	330	136	4×1,5	6xM20
FHE 680-8-3.4	680	20420	1,2	3,59	0,75	4,8	C	3	83	230	25	280	260	280	300	160	570	75	330	155	4×1,5	6xM20
FHE 1000-8-4.7	1000	30000	2,7	6,71	0,6	5,5	C	4	105	248	28	320	300	310	342	180	700	80	365	204	4×1,5	6xM20
FHE 1400-8-7.0	1400	42000	3	7,41	0,66	6	C	6	118	280	35	320	370	340	340	185	910	90	390	278	4×1,5	6xM24
FHE 1600-8-7.0	1600	48000	3	7,41	0,66	6	C	6	118	280	35	320	370	340	340	185	950	90	390	310	4×1,5	6xM24
FHE 1750-8-7.8	1750	52500	4	9,87	0,68	6,4	C	6	118	280	35	360	370	340	400	210	870	85	425	388	4×2,5	6xM24
FHE 2000-8-7.8	2000	60000	4	9,87	0,68	6,4	C	6	118	280	35	360	370	340	400	210	930	85	425	397	4×2,5	6xM24
FHE 2200-8-8.0	2200	66000	4,5	10,83	0,7	6,1	D	8	110	350	35	360	470	420	400	210	1030	90	430	490	4×2,5	8xM24

10 pole vibrator motorse (580 min^-1)

silniki-wibracyjne-friedrich-warszawa

TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	Maße Dimensions Cotesmm											Weight [kg]	Cable [mm]	Screw 8.8
TYPE	Working- moment [kg cm]	Centrifugal force [N]	Power consumption [kW]	Nominal current at 400 V [A]	Power factor [COS ∅]	Starting current ratio [IA/IN]	Abbildung Illustration	Motor base	a	b	c	d	e	f	g	h	k	n	p	Weight [kg]	Cable [mm]	Screw 8.8
FHE 680-10-3.4	680	1170	0,95	2,57	0,58	2,7	C	3	83	230	25	280	260	280	300	160	640	75	330	155	4×1,5	6xM20
FHE 1750-10-7.0	1750	30100	5	8,76	0,69	5,3	C	6	118	280	35	320	370	340	340	185	950	90	390	310	4×1,5	6xM24

General specifications

Power Supply:
Voltages from 115 V to 690 V at 50 Hz and 60 Hz available

Degree of Protection:
IP 66

Thermal class:
F (155 °C) according to DIN EN 60034-1

Tropical Insulation:
Standard

Electrical connection:
Use high flexible cable for heavy mechanical stress.Example: H07RN-F or A07RN-F according to DIN VDE 0282.

Permissible ambient temperature:
-20 to + 40 °C. Special versions with cold steel to -65 °C also available on request.

Operating mode:
Continuous operation (S1) and discontinuous operation at 100 % centrifugal force.

Hoods:
Hoods made from stainless steel, comprise the special shape. A silicone seal provides optimum protection against the ingress of dust and water.

Assembly:
Without limitation, motors can be mounted in any position.

Color coating:
Standard RAL 6011. Other colors available on request.

Type code:
The type code is read as follows:

First block number = working moment in kgcm (working moment = 2 x static moment),
This is followed by a hyphen and then the pole number,
Where: 4 = 1460 rpm 6 = 980 rpm (at 50 Hz mains frequency),
Behind the second dash, the size is specified.

Special designs and accessories available on request:

Anti-condensation heating,
Thermistor,
Split end covers (see special catalog),
Coupled motors (see special catalog),
Special steel bearing retainer (see special catalog),
Waterproof terminal box with a special sealant shed, connection cables with different Cable specifications in different lengths available.